In almost 60 years of history, Prensoland has given solution to all types of machines to manufacture beams and honeycomb concrete slabs, whose technical and production requirements are very high.
In this case, the latest technological advance is the system of lateral toothing in continuous molding, to manufacture seismic slabs.
1.000.000 m2 of hollow core slabs or equivalent products in the duration of the molds. In the absence of mechanical transmissions and wearing stress between them and the concrete, the molds keep on casting along the years.
100.000 m2 delivered at a single site: Amazon Logistic Center, Barcelone. The high load bearing capacity ratio achieved with a ‘Flow Former’ machine results in high structural efficiency.
10.000 Euro spare parts cost to operate the machine during 2 years.
1.060+ Unit machines ‘Flow Former’ installed since year 1959.
17,0 kW Nominal power installed on board the machine.
10 Minutes are enough to change the mold on the machine.
7th Generation of ‘Flow Former’ machines.
6 fixing bolts are sufficient for mounting the molds on the casting machine.
3 meters per minute, maximum speed to produce the hollow core slabs, solid slabs and a great number of profiles for various applications including the cladding walls.
1st Machine capable of producing the hollow core slabs with side indenting in a continuous molding process, according to the indications of the Eurocode 2.