How to make solid concrete blocks ?
It is important to keep in mind that it is not the same to manufacture a structural concrete block which it is supposed to load for housing, that a freestanding block to be used for internal walls and interior partitions, for example.
How to make concrete blocks :To manufacture hollow or solid concrete blocks in high quality is an easy task as long as you use suitable concrete machinery, advanced tech block machines which allow to produce high-quality blocks for all applications. Our Compacta block machines and their equipments allow to manufacture very high quality blocks, with all kinds of strength and densities that the construction industry demands worldwide.
A good knowledge of the product is essencial to be able to know how to make solid concrete blocks. First of all, you should know that not all concrete blocks are high-quality and, therefore, you must know how to distinguish them. But how can we differentiate a high-quality concrete block from another which is not? The answer is simple: the quality is measured by the strength and density of the block. Depending on the application given to the product, its strength and density is determined. You also need to produce the block at the lowest possible cost. It is important to keep in mind that it is not the same to manufacture a structural concrete block which it is supposed to load for housing, that a freestanding block to be used for internal walls and interior partitions, for example. However, both cases will need a versatile machine with excellent production and profitability.
Prensoland block machines incorporate all the latest technology to achieve high production with optimum quality, providing solutions to meet all current market needs. Its manufacturing process is divided into the following phases in order to know how to make concrete blocks:
- Filling the car charger
- Filling the mold
- Lowering the ram and compaction of concrete
- Stripping of the piece on the tray
- Output tray of finished product and empty input tray
- Lowering the mold to work position
- Restart the cycle